What Equipment Is Needed In Honey Processing?

Complete set of equipment for honey production line: automatic honey press, honey melting pool, delivery pump, preheating cylinder, fine filter, fine filter, honey concentrator, delivery pump, finished product tank, bottle washing machine (glass bottle), dryer (glass bottle), filling machine, capping machine, labeling machine, inkjet printer, conveyor belt, baler, workbench.

The automatic honey extractor is mainly used by the honey farmer to separate the honey and beeswax from the freshly picked honeycomb, and then transport it to the preheating cylinder for preheating with a delivery pump.

The honey melting tank is mainly to preheat and flow the crystallized barreled honey first, and then pump the preheated barreled honey into the preheating cylinder through the delivery pump for preheating.

When the honey concentrator opens the feed valve in a vacuum state, the honey in the preheating cylinder will be automatically sucked into the honey concentrator, and the honey will also pass through two filters during the suction process, which will save a delivery pump up.

The concentrator heats at a low temperature (below 45 degrees) to evaporate the water in the honey, and vacuum dehydrates to increase the Baume degree of the honey. This process does not affect the original nutrition of the honey.

The concentrated honey is pumped to the finished product tank through the delivery pump for storage. Then fill and pack.

If the packaging is glass bottles, a bottle washing machine and dryer are needed. If the packaging is plastic bottles, there is no need for a bottle washing machine and drying machine, but an aluminum foil sealing machine is required to prevent leakage.

After filling, you can lock the lid or seal it with aluminum foil, then label and print the production date, and finally pack it manually.