First of all, the power interface has two kinds of AC and DC. AC is a commonly used power interface, with 4 plugs, Australian/European/UK/US, which can be operated by directly plugging in the power supply. DC, the voltage is 12V, when honey filling outdoors, you can use the battery where there is no power interface. The filling volume range is 100-10000 grams, suitable for liquids of 36-43 Baume degrees, and the efficiency of 360 bottles/bottle h is 500 grams, which is suitable for small and medium production scales.
Connect the hose before filling. There are two pipes, one short and one long, to the machine. Then you need to pull out the tube of the honey inlet, take out a certain amount of honey and inject it, the honey will flow into the pump, pay attention to tighten the screw to ensure that the honey will not flow out.
Connect the battery last. Use the DC interface to connect the battery, be careful not to reverse the positive and negative poles (if there is a power supply, you can also use the AC interface to connect the power supply). Then press the power button on the machine, if the light is on, it means that the machine can be used normally, the bottle can be placed directly, and there is a speed controller that can be used to adjust the required speed. When you want to stop filling, please press the power button again, which is very convenient and practical.
